Prerequisites:
Os level user: sybase
Hostname: sybasetest
Download the software from service market place and extract the software under /sybase/software
ASE16_XXXXX.TAR
tar -xvf ASE16_XXXXX.TAR
this command will extract the software .
Installation steps:
cd /sybase/software/ebf28238
sybase@sybasetest:/sybase/software/ebf28238> ./setup.bin -i console
Preparing to install
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
SAP Adaptive Server Enterprise (created with InstallAnywhere)
-------------------------------------------------------------------------------
Preparing CONSOLE Mode Installation...
===============================================================================
Introduction
------------
InstallAnywhere will guide you through the installation of SAP Adaptive Server
Enterprise 16.0 SP03 PL05.
It is strongly recommended that you quit all programs before continuing with
this installation.
Respond to each prompt to proceed to the next step in the installation. If
you want to change something on a previous step, type 'back'.
You may cancel this installation at any time by typing 'quit'.
PRESS <ENTER> TO CONTINUE:
===============================================================================
Choose Install Folder
---------------------
Where would you like to install?
Default Install Folder: /opt/sap
ENTER AN ABSOLUTE PATH, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
: /sybase
INSTALL FOLDER IS: /sybase
IS THIS CORRECT? (Y/N): Y
===============================================================================
Choose Install Set
------------------
Please choose the Install Set to be installed by this installer.
->1- Typical
2- Typical SAP ASE, database always-on option
3- Full
4- Customize...
ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
:
===============================================================================
Software License Type Selection
-------------------------------
What would you like to do?
->1- Install licensed copy of SAP Adaptive Server Enterprise
2- Install Express Edition of SAP Adaptive Server Enterprise
3- Evaluate SAP Adaptive Server Enterprise
Enter one of the options above:
===============================================================================
End-user License Agreement
--------------------------
1) Americas and Asia Pacific 2) Argentina
3) Asia Pacific Region - General 4) Australia
5) Belgium(English) 6) Brazil
7) Canada 8) Denmark
9) Europe,Middle East, and Africa - General 10) France(English)
11) France(French) 12) Germany(English)
13) Hong Kong 14) India
15) Italy(English) 16) Italy(Italian)
17) Japan 18) Korea
19) Latin America Countries - Other than Argent 20) Malaysia
21) Mexico 22) Netherlands
23) New Zealand 24) Norway
25) People's Republic of China(PRC) 26) Singapore
27) South Africa 28) Spain(English)
29) Spain(Spanish) 30) Sweden
31) Switzerland(English) 32) Taiwan
33) United Kingdom 34) United States of America
35) Any Other Locations
Please enter the number of the location you are installing. (1-35) (Default:
1): 34
LICENSE AGREEMENT
General (applies to all countries,
except those for which a specific
country/language version is posted)
IMPORTANT NOTICE: READ THIS LICENSE AGREEMENT CAREFULLY
BEFORE USING THE ENCLOSED PROGRAM. YOU MAY USE THE PROGRAM
ACQUIRED ONLY IN THE COUNTRY IN WHICH THIS LICENSE WAS
ACCEPTED, AND ONLY IN ACCORDANCE WITH THE FOLLOWING TERMS
AND CONDITIONS. IF YOU DO NOT AGREE TO BE BOUND BY THESE
TERMS, YOU MAY NOT USE THE PROGRAM. BY DOWNLOADING,
INSTALLING, OR USING THE PROGRAM IN ANY WAY, YOU ACKNOWLEDGE
THAT YOU HAVE READ, UNDERSTAND AND AGREE TO THE TERMS OF
THIS AGREEMENT. IF YOU DO NOT AGREE WITH THESE TERMS,
PRESENT YOUR RECEIPT OR OTHER PROOF OF PURCHASE, TOGETHER
WITH THE PROGRAM MEDIA, DOCUMENTATION AND PACKAGING (IF ANY)
TO THE ENTITY FROM WHICH YOU OBTAINED THIS PRODUCT WITHIN 30
DAYS TO REQUEST A REFUND. THIS IS A LICENSE AND NOT A SALE.
Press ENTER to read the text [Type 'back' and press ENTER to skip the text]
: back
I agree to the terms of the SAP license for the install location specified.
(Y/N): Y
===============================================================================
SySAM License
-------------
Enter the SAP Adaptive Server Enterprise license key(s) or specify the license
server where license key(s) were previously deployed.
->1- Specify license keys
2- Use previously deployed license server
3- Continue installation without a license key
Enter one of the options above: 3
===============================================================================
Product Licenses
----------------
Please select the product edition and license type you would like to
configure.
Product Edition
->1- Enterprise Edition
2- Small Business Edition
3- Unknown
Enter one of the options above:
License Type
->1- CP : CPU License
2- SF : Standby CPU License
3- SR : Server License
4- SV : Standby Server License
5- DT : Development and Test License
6- EV : Evaluation License
7- OT : Other License
8- SS : Standalone Seat License
9- DV : Developer License
10- NA : Not Applicable or Other License
11- AC : OEM Application Deployment CPU License
12- BC : OEM Application Deployment Standby CPU License
13- AR : OEM Application Deployment Server License
14- BR : OEM Application Deployment Standby Server License
15- AO : OEM Application Deployment Other License
16- LP : Application Specific CPU License
17- LF : Application Specific Standby CPU License
18- LR : Application Specific Server License
19- LV : Application Specific Standby Server License
20- Unknown
Enter one of the options above:
===============================================================================
SySAM Notification
------------------
Please configure the SySAM email alert mechanism. When configured, specified
recipients will receive email notifications about SySAM events that may need
administrator attention.
Do you want to configure email alerts? (Y/N): N
===============================================================================
Pre-Installation Summary
------------------------
Please Review the Following Before Continuing:
Product Name:
SAP Adaptive Server Enterprise
Install Folder:
/sybase
Product Features:
SAP Adaptive Server Enterprise,
Open Client,
DB-Library,
jConnect 16.0 for JDBC,
Interactive SQL,
QPTune,
SySAM License Utilities,
Remote Command and Control Agent for SAP ASE,
SAP ASE ODBC Driver,
SAP ASE Extension Module for Python,
SAP ASE Database Driver for PERL,
SAP ASE Extension Module for PHP,
Cockpit,
SAP ASE Cockpit
Disk Space Information (for Installation Target):
Required: 1,950,091,659 Bytes
Available: 17,439,690,752 Bytes
PRESS <ENTER> TO CONTINUE:
===============================================================================
Ready To Install
----------------
InstallAnywhere is now ready to install SAP Adaptive Server Enterprise onto
your system at the following location:
/sybase
PRESS <ENTER> TO INSTALL:
===============================================================================
Installing...
-------------
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Configure New Servers
---------------------
The SAP Adaptive Server Enterprise includes products that require
configuration. If you choose to configure the products on this screen, you
will be given the option to specify custom values for each product. If you
choose not to configure the products now, you can configure them later.
Please deselect any products that you do not want to configure now :
[ ] 1 - Configure new SAP ASE
[ ] 2 - Configure new Backup Server
[ ] 3 - Configure new XP Server
[ ] 4 - Configure new Job Scheduler
[ ] 5 - Enable Self Management
[ ] 6 - Configure Historical Monitoring Data Repository
[ ] 7 - Configure Cockpit
** NOTE: The Historical Monitoring Data Repository should only be configured
if you are using SAP ASE in SAP Business Applications. Use in a standalone SAP
ASE is not supported.
To select an item enter its number, or 0 when you are finished: (Default: 0)
: 1
[X] 1 - Configure new SAP ASE
[ ] 2 - Configure new Backup Server
[ ] 3 - Configure new XP Server
[ ] 4 - Configure new Job Scheduler
[ ] 5 - Enable Self Management
[ ] 6 - Configure Historical Monitoring Data Repository
[ ] 7 - Configure Cockpit
** NOTE: The Historical Monitoring Data Repository should only be configured
if you are using SAP ASE in SAP Business Applications. Use in a standalone SAP
ASE is not supported.
To select an item enter its number, or 0 when you are finished: (Default: 0)
: 2
[X] 1 - Configure new SAP ASE
[X] 2 - Configure new Backup Server
[ ] 3 - Configure new XP Server
[ ] 4 - Configure new Job Scheduler
[ ] 5 - Enable Self Management
[ ] 6 - Configure Historical Monitoring Data Repository
[ ] 7 - Configure Cockpit
** NOTE: The Historical Monitoring Data Repository should only be configured
if you are using SAP ASE in SAP Business Applications. Use in a standalone SAP
ASE is not supported.
To select an item enter its number, or 0 when you are finished: (Default: 0)
: 0
===============================================================================
Configure Servers with Different User Account
---------------------------------------------
Do you want to configure the server(s) under different user account?
1- Yes
->2- No
Enter one of the options above:
===============================================================================
User Configuration Data Directory
---------------------------------
Enter the directory where you want to store user data files such as interfaces
file, RUN_<server> file, error log, etc.. The files for the server(s) you
about to create will be placed in this directory.
Data Directory (Default: /sybase):
===============================================================================
Configure New SAP ASE
---------------------
SAP ASE Name (Default: sybasetest): TEST
System Administrator's Password:
Confirm System Administrator's Password:
The 'System Administrator's Password' does not match.
PRESS <ENTER> TO CONTINUE:
System Administrator's Password:
Confirm System Administrator's Password:
Host Name (Default: sybasetest.corp.pep.pvt): sybasetest
Port Number (Default: 5000): 50121
Error Log (Default: /sybase/ASE-16_0/install/TEST.log): /sybase/ASE-16_0/install/TEST.log
Application Type
->1- Mixed (OLTP/DSS)
2- Online Transaction Proccessing (OLTP)
3- Decision Support Systems (DSS)
Select an application type:
Page Size
1- 2k
->2- 4k
3- 8k
4- 16k
Select a page size: 1
->1- us_english
Default Language:
1- cp437 : Code Page 437, (United States) character set.
2- cp850 : Code Page 850 (Multilingual) character set.
3- iso15 : ISO_8859-15:1998, Latin9, Western Europe
->4- iso_1 : ISO 8859-1 (Latin-1) - Western European 8-bit character set.
5- mac : Macintosh default character set for Western European locales.
6- roman8 : Hewlett-Packard proprietary character set for European locales.
7- roman9 : Hewlett-Packard proprietary character set for European locales.
8- utf8 : Unicode 3.1 UTF-8 Character Set
Default Character Set:
->1- bin_iso_1 : Binary ordering, for the ISO 8859/1 or Latin-1 character set
(iso_1).
2- dictionary_iso_1 : General purpose dictionary ordering.
3- espdict_iso_1 : Spanish dictionary ordering.
4- espnoaccents_iso_1 : Spanish case and accent insensitive dictionary order.
5- espnocase_iso_1 : Spanish case insensitive dictionary order.
6- noaccents_iso_1 : Dictionary order, case insensitive, accent insensitive.
7- nocase_iso_1 : Dictionary order, case insensitive.
8- nocasepref_iso_1 : Dictionary order, case insensitive with preference.
Default Sort Order: 7
Enable SAP ASE for SAP ASE Cockpit monitoring
1- No
->2- Yes
Do you want to enable SAP ASE for SAP ASE Cockpit monitoring?: 1
Optimize SAP ASE Configuration
->1- No
2- Yes
Do you want to optimize SAP ASE configuration?:
Create sample databases
->1- No
2- Yes
Do you want to create sample databases?:
Master Device (Default: /sybase/data/master.dat): /sybase/data/master.dat
Master Device Size (MB) (Default: -1): 500
Master Database Size (MB) (Default: 18): 150
System Procedure Device (Default: /sybase/data/sysprocs.dat): /sybase/data/sysprocs.dat
System Procedure Device Size (MB) (Default: -1): 1000
System Procedure Database Size (MB) (Default: 196): 250
System Device (Default: /sybase/data/sybsysdb.dat): /sybase/data/sybsysdb.dat
System Device Size (MB) (Default: -1): 100
System Database Size (MB) (Default: 3):
Tempdb Device (Default: /sybase/data/tempdbdev.dat): /sybase/data/tempdbdev.dat
Tempdb Device Size (MB) (Default: -1): 8192
Tempdb Database Size (MB) (Default: 100): 8192
Enable PCI
->1- No
2- Yes
Do you want to configure PCI/JAVA?:
===============================================================================
Configure New Backup Server
---------------------------
Backup Server Name (Default: TEST_BS):
Port Number (Default: 5000): 50122
Error Log (Default: /sybase/ASE-16_0/install/TEST_BS.log): /sybase/ASE-16_0/install/TEST_BS.log
Allow Hosts (Default: ):
===============================================================================
New Server Configuration Summary
--------------------------------
SAP ASE
SAP ASE Name TEST
System Administrator's Password ******
Enable SAP ASE for SAP ASE Cockpit monitoring false
Technical user tech_user
Technical user password ********
Host Name sybasetest
Port Number 50121
Application Type Mixed (OLTP/DSS)
Create sample databases false
Page Size 2k
Error Log
/sybase/ASE-16_0/install/TEST.log
Default Language us_english
Default Character Set iso_1
Default Sort Order nocase_iso_1
Master Device /sybase/data/master.dat
Master Device Size (MB) 500
Master Database Size (MB) 150
System Procedure Device /sybase/data/sysprocs.dat
System Procedure Device Size (MB) 1000
System Procedure Database Size (MB) 250
System Device /sybase/data/sybsysdb.dat
System Device Size (MB) 100
System Database Size (MB) 3
Tempdb Device /sybase/data/tempdbdev.dat
Tempdb Device Size (MB) 8192
Tempdb Database Size (MB) 8192
Enable PCI false
Optimize SAP ASE Configuration false
Backup Server
Backup Server Name TEST_BS
Port Number 50122
Error Log /sybase/ASE-16_0/install/TEST_BS.log
Do you want to continue? (Default: yes): yes
===============================================================================
Configure New SAP ASE
---------------------
Building SAP Adaptive Server Enterprise 'TEST':
Writing entry into directory services...
Directory services entry complete.
Building master device...
Master device complete.
Writing RUN_TEST file...
RUN_TEST file complete.
Starting server...
Server started.
Set SA password...
SA password is set.
Building sysprocs device and sybsystemprocs database...
sysprocs device and sybsystemprocs database created.
Running installmaster script to install system stored procedures...
installmaster: 10% complete.
installmaster: 20% complete.
installmaster: 30% complete.
installmaster: 40% complete.
installmaster: 50% complete.
installmaster: 60% complete.
installmaster: 70% complete.
installmaster: 80% complete.
installmaster: 90% complete.
installmaster: 100% complete.
installmaster script complete.
Creating two-phase commit database...
Two phase commit database complete.
Extending tempdb database ...
Extending tempdb database complete.
Installing common character sets (Code Page 437, Code Page 850, ISO Latin-1,
Macintosh and HP Roman-8)...
Character sets installed.
Setting server name in SAP Adaptive Server Enterprise...
Server name added.
Setting optimization goal...
Setting optimization goal complete.
Server 'TEST' was successfully created.
===============================================================================
Set SAP ASE Default Language
----------------------------
Installing character set 'ISO Latin-1' in the SAP Adaptive Server
Enterprise...
Warning: Character set 'ISO Latin-1' is already installed in the SAP Adaptive
Server Enterprise.
Installing character set 'ISO_8859-15:1998' in the SAP Adaptive Server
Enterprise...
Character set 'ISO_8859-15:1998' was successfully installed in the SAP
Adaptive
Server Enterprise.
Installing character set 'roman9' in the SAP Adaptive Server Enterprise...
Character set 'roman9' was successfully installed in the SAP Adaptive Server
Enterprise.
Installing character set 'UTF-8' in the SAP Adaptive Server Enterprise...
Character set 'UTF-8' was successfully installed in the SAP Adaptive Server
Enterprise.
Installing sort order 'Dictionary order, case insensitive' in the SAP Adaptive
Server Enterprise...
Sort Order 'Dictionary order, case insensitive' was successfully installed in
the SAP Adaptive Server Enterprise.
Making 'Dictionary order, case insensitive' the SAP Adaptive Server
Enterprise's default sort order...
The SAP Adaptive Server Enterprise's default sort order is now 'Dictionary
order, case insensitive'.
Done
===============================================================================
Configure New Backup Server
---------------------------
Building Backup Server 'TEST_BS':
Writing entry into directory services...
Directory services entry complete.
Writing RUN_TEST_BS file...
RUN_TEST_BS file complete.
Starting server...
Server started.
Server 'TEST_BS' was successfully created.
===============================================================================
Installation Completed
----------------------
The installation was successful.
Please check regularly for updates at http://service.sap.com.
If you have not done so, obtain license files from the SAP Support Portal at
https://support.sap.com/licensekey.
PRESS <ENTER> TO EXIT THE INSTALLER:
sybase@sybasetest:/sybase/software/ebf28238>
No comments:
Post a Comment